triumphs
[Top] [All Lists]

Re: [TR] Aluminum radiators

To: triumphs@autox.team.net
Subject: Re: [TR] Aluminum radiators
From: Randall <tr3driver@ca.rr.com>
Date: Thu, 24 Oct 2013 19:22:28 +0000
Authentication-results: cdptpa-omtalb.mail.rr.com smtp.user=tr3driver@ca.rr.com; auth=pass (LOGIN) a=IkcTkHD0fZMA:10 a=ayC55rCoAAAA:8 a=KGjhK52YXX0A:10 a=0wRQmWtS3bEA:10 a=F23foPYxyOXHbyxn4AMA:9 a=QEXdDO2ut3YA:10 a=KOrh491K8B87fFeLgJkoRw==:117
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Sensitivity: Normal
> 1) Use the current radiator, and don't go on the race track

I would definitely not take that option!  My radiator shop said my TR3 radiator 
"flowed fine" and yet I had persistent overheating problems during just normal 
highway driving that proved to be caused by crud buildup inside the tubes.  
None of the tubes were blocked, but the crud was acting like an insulator and 
reducing the essential heat flow.

This is not my first experience with cooling issues caused by invisible 
radiator problems.  The previous TR3A had very similar symptoms (temp would 
creep up at freeway speeds even with just 70F air), and recoring the radiator 
immediately solved them entirely.

> I know that if I use the radiator with the starter hole that
> I lose something like 5% of my cooling, 

More like 10-15% according to my radiator guy.  All of the tubes that would 
normally go through the space occupied by the crank hole are totally blocked 
off, so they do nearly nothing as far as cooling.  You lose not just the open 
space of the hole, but a section that wide of the entire height of the radiator.

Another option is to have your original radiator re-cored.  I'm told that 
Modine no longer makes the core I got in the 3A, but there is another company 
that will make radiator cores to order (and they have the specification to fit 
the TR3).  You can even keep the crank hole if you choose (although I didn't).  
Your local radiator shop should be able to handle ordering the core and 
installing it for you.

I am very happy with my recored radiator and electric fan.  The engine stays 
cool under all conditions, even during autocrossing or sustained full throttle 
operation; and the fan only runs for a few seconds at idle or stop-n-go before 
the water coming back from the radiator drops below 190F (the setpoint I 
chose).  I also had the shop change the filler neck to take a modern cap, so I 
could add a recovery bottle.

In retrospect, I kind of wish that I had tried putting back the stock 
mechanical fan with the recored radiator, as I suspect that might have worked 
as well.  But for now at least, I have no intentions of going back.

Randall

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>