Subject: | Re: [TR] 57 TR3 compression test results |
---|---|
From: | "Randall" <TR3driver@ca.rr.com> |
Date: | Fri, 21 Jun 2013 00:00:49 -0700 |
Cc: | "'Triumph Discussion'" <triumphs@autox.team.net> |
Delivered-to: | mharc@autox.team.net |
Delivered-to: | triumphs@autox.team.net |
Thread-index: | Ac5sXD01p3YRpZFqSyufgQyA5kpNZAB75NLQ |
> The head was rebuilt about 1,000 miles ago with hardened > valve seats, new valves etc. Likely it is fine, but I wouldn't assume anything. This head had less than 20,000 on new valves & hardened exhaust seats: http://tinyurl.com/m6ouoqs > There were cracks in the head > that were fixed at the same time. Danger danger, Will Robinson! Or maybe a better phrase is "Trust, but verify". Be sure to check liner protrusion on both sides, even if you don't change the liners. -- Randall ** triumphs@autox.team.net ** Archive: http://www.team.net/archive |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TR] Looking for a TR4A turn signal switch, Dave Connitt |
---|---|
Next by Date: | Re: [TR] 57 TR3 compression test results, Jeremiah Curry |
Previous by Thread: | Re: [TR] 57 TR3 compression test results, Jeremiah Curry |
Next by Thread: | Re: [TR] 57 TR3 compression test results, Jeremiah Curry |
Indexes: | [Date] [Thread] [Top] [All Lists] |