Or, given the latest study from The List, 50/50 solution of acetone & ATF.
B
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Geo Hahn
Sent: Tuesday, January 29, 2013 7:28 AM
To: David B. Hammond
Cc: list Triumph
Subject: Re: [TR] TR engine block
On Mon, Jan 28, 2013 at 9:25 PM, David B. Hammond <dbh@hamengr.com> wrote:
> Just pulled the head only to discover a broken stud midway on pass side.
>
If you haven't already, I would be soaking that guy with PBlaster.
Hopefully it is not in there real tight.
I once had one break off but when I reinserted the jagged broken piece it
was able to engage its mate and by pressing down I was able to thread it
out. I don't expect to get that lucky twice in one lifetime.
Geo
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|