I cut a hole in the right tranny tunnel in my TR3A a few years ago. I made it
the same size as the hole in the floor and used that plug to seal it..
Tom
60 TR3A
61 TR3A
62 TR4
73 Stag Mk II
----- Original Message -----
From: "Randall" <TR3driver@ca.rr.com>
Cc: triumphs@autox.team.net
Sent: Saturday, November 3, 2012 4:12:23 AM
Subject: Re: [TR] Topping off gear box and diff
> Seriously: B How much does a second set of Rhino ramps cost?
A lot more than they're worth. B The ramps won't fit under middle of the car
and it's really tough to have the front wheels moving forwards onto the
ramps, while the back wheels move backwards onto the ramps. B A jack and two
pairs of jackstands work a lot better.
Without overdrive, I don't think you've got anything to worry about. B The
gearbox and diff plugs are pretty close to the center, so the error will be
small and the worst that will happen is that the excess will leak out
faster. B
With overdrive though, I'd want to get it level somehow. B I hear it's
possible to cut a hole in the side of the trans tunnel so you can fill it
with the wheels on the ground.
-- RandallB B
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|