triumphs
[Top] [All Lists]

Re: [TR] TR6 Jacking Points

To: Bud Rolofson <levilevi@comcast.net>
Subject: Re: [TR] TR6 Jacking Points
From: Chris Simo <ccsimonsen@gmail.com>
Date: Fri, 10 Feb 2012 22:32:07 -0500
I'm guilty of surviving more than a few non text book support techniques.

Not any more. I have a wife and relatives who depend on me. So I support
the car and shove the tires underneath just in case....
On Feb 10, 2012 9:55 PM, "Bud Rolofson" <levilevi@comcast.net> wrote:

> I jack the front first using the radiator shield and then jack one frame
> rail (usually the drivers side) right behind the tire high enough to get
> two more jack stands under it.  Never had a problem with raising the rear
> that way since the engine weight is all on/in front of the front jack
> stands.  This is the quickest I've founded and I've done side to side
> jacking also but it takes a lot of jockeying back and forth with the jack
> as you get real nervous see your car that tilted to one side so much, so
> its back and forth a couple of times on both sides.
>
> I always use two spare tires on wheels and inflated (unfortunately or
> fortunately I have two spares I salvaged from the last two cars my wife
> totaled) and slide them under the frame rails just in case the jack stands
> fail.  I figure it at least gives me 8-10 inches of space even if the jack
> stands fail and a shot at surviving.  For years I did cinder blocks until
> this list educated me. Nevermore.
>
> Bud Rolofson
>
> 71TR6 CC57365 (Good 6)
> 66TR4A CTC57806 (The Wreck-Almost parts)
> 66TR4A CTC57529 (The Project)
> 71F-250 Camper Special (Triumph Support Vehicle)
> Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
> levilevi@comcast.net
>
>
>
>
> On Feb 8, 2012, at 4:20 PM, Jeff wrote:
>
>  So, I've managed to get my '75 TR6 up on stands several times, but it's
>> not clear to me where I can lift the thing.  On the front I see the
>> crossmember under the oil pan, but there's also the radiator support that
>> looks pretty stout.  At the rear, there's no place obvious except the
>> "t-shirt" area, but I can see that would be a bad idea.  Plus, it's hard to
>> slide the jack that far underneath.
>>
>> So...what's the best way to get a TR6 up on jack stands?
>>
>> Jeff Scarbrough
>> Corrosion Acres, Ga.
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>> 
>options/triumphs/levilevi@**comcast.net<http://autox.team.net/mailman/options/triumphs/levilevi@comcast.net>
>>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> 
>options/triumphs/ccsimonsen@**gmail.com<http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com>

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>