Jeff,
On my TR4A, which basically has the same chassis, I use that front cross
member you mention, and the differential for the rear.
On Feb 8, 2012, at 5:20 PM, Jeff wrote:
> So, I've managed to get my '75 TR6 up on stands several times, but it's not
clear to me where I can lift the thing. On the front I see the crossmember
under the oil pan, but there's also the radiator support that looks pretty
stout. At the rear, there's no place obvious except the "t-shirt" area, but I
can see that would be a bad idea. Plus, it's hard to slide the jack that far
underneath.
>
> So...what's the best way to get a TR6 up on jack stands?
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/guy@genfiniti.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|