Got mine done at a local machine shop... $85.
Bill Beecher
'58 TR-3A TS30766L "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of pethier at comcast.net
Sent: Wednesday, March 16, 2011 9:35 PM
To: Michael Marr
Cc: triumphs at autox.team.net
Subject: Re: [TR] modifying a reamer for carb shaft
> From: "Michael Marr" <mmarr at notwires.com>
> In other words, you would pull the reamer through the holes rather
> than pushing. ?I would certainly not try to add the required cutting
> edge by hand, but a tool-maker could do it fairly easily, if you know
> one that is willing to do some "government" work...
The person you are looking for is a "tool and cutter grinder". Just look
for the guy with the grinder marks on his safety glasses. :-)
Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack"
2004 Suburban 8.1
2005 Lotus Elise
2007 Saturn Ion 3 2.4
pethier [at] comcast [dot] net
http://www.flickr.com/photos/pethier
http://www.triumphtransamerica.org
http://www.mnautox.com
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|