> To mount a bolt to "drop" the radiator onto - the
> capture nut would have to be removed.
Or, as Bob Schaller suggested, used a smaller diameter bolt so the captive
nut will fit over it.
Yet another way to do a "drop in" installation would be to install a
fully-threaded bolt from the top.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|