I did this on my car quite a few years ago, but here goes..
Don't remove the capture nut, but thread a bolt (same size but longer) up
thru the capture nut and then put the radiator on and install the nut from
the top. Much simpler than trying to install the bolt from the top.
Hope this helps
Tom
60 TR3A
61 TR3A
62 TR4
73 Stag
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|