Folks,
Its been too long since I had physics, but does the size of the vacuum
line really matter once the vacuum is present? Just a curiosity question.
Thanks
Doug
On 7/5/2010 9:20 AM, Carl TR wrote:
> Does anyone know of a source for replacement vacuum line
>
> Late TR3A
> screw type connections
>
> at the distributor: 8mm w/1mm thread nut
> at carburettors: 7mm w/1mm female end
>
> I have the 7mm fitting that was in the carb housing but might as well
> replace both if I can find them.
>
> What diameter is the tubing. it appears to be about 1/8 od but since the
> fittings are metric - it might be a metric size tube.
>
> Also - what length. I figured at max a length equivalent to the fuel line
> from near the distributor to the connection at the carb.
>
> Thanks
> C
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/triumphs/mathews@uga.edu
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|