Does anyone know of a source for replacement vacuum line
Late TR3A
screw type connections
at the distributor: 8mm w/1mm thread nut
at carburettors: 7mm w/1mm female end
I have the 7mm fitting that was in the carb housing but might as well
replace both if I can find them.
What diameter is the tubing. it appears to be about 1/8 od but since the
fittings are metric - it might be a metric size tube.
Also - what length. I figured at max a length equivalent to the fuel line
from near the distributor to the connection at the carb.
Thanks
C
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|