triumphs
[Top] [All Lists]

Re: [TR] TR3B rear motor mount

To: "TR List" <triumphs@autox.team.net>
Subject: Re: [TR] TR3B rear motor mount
From: "oliver" <sumton@sbcglobal.net>
Date: Fri, 8 May 2009 09:31:33 -0500
i'm going to go out on a limb here, as i am certainly not "Mr. Triumph"

i believe all TR cars the tranny, OD or otherwise, is a straight swap.

the tr6 has a different shifter, but they are interchangeable.

no different lengths


----- Original Message ----- 
From: "Geo Hahn" <ahwahnee18@gmail.com>
To: "TR List" <triumphs@autox.team.net>
Sent: Friday, May 08, 2009 9:22 AM
Subject: Re: [TR] TR3B rear motor mount


>I was (blissfully) unaware there was a difference in length other than
> possibly a small difference in the thickness of the bell-housing flange.
>
> I'll be interested in knowing as the spare gearbox on have on the shelf 
> for
> my TR3A is from a TR4.
>
> On Fri, May 8, 2009 at 5:35 AM, Ed Woods <fogbro1@comcast.net> wrote:
>
>> List,
>>
>> What method did the factory use to accomodate the longer transmission in
>> the TR3B? Was the bracket moved on the frame? Was the bracket slotted? 
>> Was
>> the motor mount slotted? Other?
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>