Paul, my rule of thumb is to trust the factory and you won't go wrong.
There is no advantage to going to larger tubing as there is very
little flow.
Mike Moore
On May 5, 2009, at 5:44 AM, dorpaul wrote:
> Hi,
>
> Is it correct to use the same size tubing
> between the Clutch MC and it's slave cylinder
> as that of the brake line (I think that's 1/8" tubing, right?).
> Is there any benefit to using a larger diameter tubing for this
> line? If so,
> I'll need to obtain fittings for the larger tube (from where?).
>
> Thanks, Paul Dorsey
> _____
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|