I found that putting the smallest one with the locking hooks on first is the
answer. Then the flat one that goes against the backing plate and then tap
in the one with the small hooks. Put a little grease on these as they want
to
be able to move to center the cylinder as the shoes bed in.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Check out smokinb hot deals on laptops, desktops and more from
Dell. Shop Deals
(http://pr.atwola.com/promoclk/100000075x1213345834x1200842686/aol?redir=http
://ad.doubleclick.net/clk;209513277;31396581;l)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|