To quote Francis Urquhart ("House of Cards"): "You might think that, but I
couldn't possibly say that..."
Mike
>> Knurling a shaft that is a loose press fit or making random center punch
>> marks on the OD of a bushing that is a little loose are old machinists
>> tricks that would get you fired in the shop that I worked in back in the
>> 60s. Now, it appears, it is a valid production technique! I will make
>> my
>> own assumption as to the source of the pumps Randall refers to...
>>
> We're talking about the same folks who laced baby formula with melamine
>
> Dave
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as mmarr@notwires.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|