I just measured the aftermarket one on the TR4 and it is 5/8" there.
Measured a spare which is a pretty old Lucas part and it measures 9/16"
I begin to suspect that this is not a critical dimension.
Geo
----- Original Message -----
From: "J.C. Hassall" <jhassall@blacksburg.net>
To: "TR list" <triumphs@autox.team.net>
Sent: Sunday, January 20, 2008 7:06 AM
Subject: [TR] TR4 distributor rotor size?
>I have a pair of 40795 distributors for my TR4, each with different
> rotors. One measures 1/2" across the cord of the arm...
>...The other measures 7/8" across the arm...
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|