Put the yoke in a vise with a socket the same diameter as the u-joint cap
between the cap and the vise jaw. IF both caps are in place put another
socket the diameter of the ypke housing on the other side. Then crank the
vise closed and press out the cap. Sometimes you may need to use a cheater
bar to crank the vise on a frozen cap.
Best regards,
Tom
_________________________________________________________________
Need to know the score, the latest news, or you need your Hotmail.-get your
"fix".
http://www.msnmobilefix.com/Default.aspx
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|