I've used a Unisyn for 20+ yrs:
http://www.tperformance.com/street_rod_store/carburetion/tuning_tools/
--
Gary J. Hamilton
-------------- Original message --------------
From: "Randall" <tr3driver@ca.rr.com>
> > Working on motorcycles for decades now, I'm quite used to synchronizing
> > carburetors. I have to say that neither matching throttle blade gap nor
> > using a hose to listen with is very accurate.
>
> Just to be clear, Nolan, the SU Tool kit does neither of those things.
>Instead,
> it measures the movement of the venturi piston, which responds directly to
> venturi velocity. This gives it an accuracy comparable to a mercury manometer
> (what you call a synch stick).
>
> Randall
>
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html
>
> === This list supported in part by The Vintage Triumph Register
> === http://www.vtr.org
>
> === Help keep Team.Net on the air: http://www.team.net/donate.html
>
> === unsubscribe/change address requests to majordomo@autox.team.net
> === Archives at http://www.team.net/archive
> === http://www.team.net/the-local
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|