No wonder! It was the DPO who took out the seats on my abandoned project
TR3.
And I have found 3 of 4 of the sliders. I also found a bright chrome piece
which is also about the same size as a slider (but can't be used as one).
Does anyone have this 'slider-like piece'?
Paul
----- Original Message -----
From: "Bill & AnnaBelle Pugh" <anabil007@comcast.net>
To: "Paul Dorsey" <dorpaul@negia.net>; "TriumphList"
<Triumphs@autox.team.net>
Sent: Friday, July 07, 2006 7:49 PM
Subject: Re: [TR] help for TR3 seat installation
> Kinda sounds like you are missing the seat "sliders" that have studs
> that bolt to the seat pan. Look at the Moss Catalog for item 801-400
> and 801-405, the two center pieces are the "sliders" one for each side
> should have the lever to release for seat adjustment...
>
> Good Luck
>
>>My TR3 workshop manual says nothing about putting the seats back togather.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|