My TR3 workshop manual says nothing about putting the seats back togather.
Since several years have passed since removing these, I need some help!
I had the seat rails and floorpans powdercoated. Since I have a total of 4
seat rails, I presume I have the two rails ready to attach to the new floorpan
for each side. WOH! that's not enough!!!!!!!!!!!!!!!!!!!!!!
Please help! I have 2 seats in two seat pans (with backs). The holes in the
floorpans match 2 of the 4 rails, and the others have adjustment holes. But
the holes in the seatpans don't match-up with anything. What am I missing?
Thanks,
Never-driven-a-Triumph (NdaT) Paul
60 TR3
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|