Kinda sounds like you are missing the seat "sliders" that have
studs that bolt to the seat pan. Look at the Moss Catalog for
item 801-400 and 801-405, the two center pieces are the "sliders" one
for each side should have the lever to release for seat adjustment...
Good Luck
>My TR3 workshop manual says nothing about putting the seats back togather.
>Since several years have passed since removing these, I need some help!
>
>I had the seat rails and floorpans powdercoated. Since I have a total of 4
>seat rails, I presume I have the two rails ready to attach to the new floorpan
>for each side. WOH! that's not enough!!!!!!!!!!!!!!!!!!!!!!
>
>Please help! I have 2 seats in two seat pans (with backs). The holes in the
>floorpans match 2 of the 4 rails, and the others have adjustment holes. But
>the holes in the seatpans don't match-up with anything. What am I missing?
>
>Thanks,
>Never-driven-a-Triumph (NdaT) Paul
>60 TR3
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|