Re: [TR] Tr3A Upper wishbone bushing replacement question

[tr3driver@comcast.net]

From: "Kinderlehrer" <Kinderlehrer@comcast.net>
> So, I thought it would be simple enougn to 
> remove the "inner upper fulcrum pin" and deal with the whole thing off the 
> car - the question is, are there nuts under the bolts that hold this pin on 
> that will fall somewhere into the spring never to be replaced again?

Yes, there are.  If you are extremely lucky, they will be held in place by dirt 
and grunge, but odds are that at least one will fall out.  And you have to 
remove the spring to replace them.

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org