Stephen,
When I use this tool, I undo the nut partially so that I press on the nut
not the end of the stud - otherwise you may mash the ends of the threads
(ask me how I know).
Also, when the joint does let go (often with a loudish "crack" that is
alarming the first time you hear it), it stops the parts from falling on the
floor ;-)
Jeff
Randall wrote:
> There are special tools
> available to supply the force, for example
> http://www.thetoolwarehouse.net/shop/TA-61900.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|