RE: Rack & Pinion Conversion

["Randall" <tr3driver@comcast.net>]

> Rebuild the original and you may
> save some money, but it will wear out quicker

The cam & peg box in my (now wrecked) TR3A has only been rebuilt once in 45
years and some 300,000 miles ... and the rebuild only cost about $30 in parts
(mostly because I didn't replace the worm or bearings).

If it only goes another 100,000 on the rebuild, I'll still call that money well
spent.

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org