John,
You didn't describe how much you can move the rack, but my guess is that you
have a worn spot in the rack. Options are to have a good mechanic restore the
rack, or get a refurb unit from The Big 3. I also suggest you replace the
mounts as well.
You can either replace the bushings or go to the aluminum hard mounts that TB3
sells.
Mel from the San Diego TR club wrote a neat trick on how to install the
bushings:
http://www.vtr.org/maintain/tr6-steering-rack.html
Remember to have the front end alignment checked when you're done.
Have fun, and merry xmas.
John
On Wednesday, December 22, 2004 7:06 PM, John Gumkowski
[SMTP:johngumkowski@sbcglobal.net] wrote:
> Shaking each front wheel side to side on my TR6 produced a clunking
> sound on the right side. I traced it to the right inner tie rod end. I
> ordered TRF replacement ends and started installation. I found that
> although the end on the right side had some wear, I also can move the
> rack side to side in the housing. Hmmm.
>
> What is the best course? A new rack? Replace the right side rack bush?
> How is that done?
>
> I might be leaning to a new/reman rack to be sure all components are to
> spec. Any/all comments are welcome.
>
> John Gumkowski
> '72 TR6
> Vernon, CT
|