Andy,
I recently replaced my original starter with a gear reduction model (not
from Moss, but I'm assuming identical). The installation was very
straightforward. No modifications were required. I did a add a jumper
bypassing the solenoid on the new starter.
The starter works great!
Kurtis J.
Russellville, Arkansas
1963 TR4
CT19389L
www.geocities.com/tr4_1963
----- Original Message -----
From: "Andrew Taylor" <ataylor@mail.hrca.harvard.edu>
To: <triumphs@autox.team.net>
Sent: Friday, June 04, 2004 8:58 AM
Subject: gear reduction starter for '62 TR4
> Starter is shot and so I need to replace it. I was wondering whether
anyone has put the Hi Torque Starter from Moss on their TR4. Replacing the
starter seems pretty straight forward - - two bolts and the old on is off --
two bolts and the new one is on. But, Moss says" Some modifications may be
necessary to install" and "For cars with open drive starter and bolt-on ring
gear."
> What am I missing here???
>
> TIA!
>
> Andy Taylor
> Boston
|