triumphs
[Top] [All Lists]

RE: piston & liner (update)

To: "Bill & Skip Pugh" <anabil@caltel.com>, "TR List" <triumphs@autox.team.net>
Subject: RE: piston & liner (update)
From: "Jim Bauder" <jimbpps@cox.net>
Date: Wed, 28 Apr 2004 14:53:40 -0700
Bill,

Sorry to hear of your cracked head! I think that is very unusual, I don't
think I have ever heard of a TR3 with a cracked head like that, other than
the web between cylinders 3 & 4, and they all seem to have that!

Your experience with Wayne was similar to all of my dealings with him!

Good luck,

Jim

Jim Bauder
'58 TR3
Scottsdale, AZ

-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Bill & Skip Pugh
Sent: Wednesday, April 28, 2004 12:36 PM
To: triumphs@autox.team.net
Subject: piston & liner (update)


Well folks we were ALL wrong...
        It  was not a piston
        It was not a valve
        It was...a cracked head!!  ARRRRGGGGHHHH...magnaflux showed
deep crack between intake and exhaust valve on cylinder #4, extended
from bottom of head up through the exhaust valve  seat...fortunately
Triumphs Only  had  good  used heads, Wayne even picked out two of
the best, told me to check them out and return the one we  did not
use...can't  ask for better  service  than that...

--
Bill  Pugh
1957 TR3
aka
Casper
Wallace, CA





<Prev in Thread] Current Thread [Next in Thread>