Hi Dale,
My variation on this is to use a piece of wire coat hanger, create a double
ended hook, this will hold itself in place whilst you fit the timing cover,
leaving both hands free to fit the cover, and not requiring exertion whilst
locating it.
Tuppence worth?
Graham
----- Original Message -----
From: "Judd, Robert"
Subject: RE: timing cover
> Dale,
> Get a piece of string or cord and loop it over the adjuster. Pull it tight
> and hold it against the edge of the cover to compress the adjuster. Fit
the
> timing cover loosely such that the adjuster is between the chain and the
> cover. Then once its in place, release one end of the string and pull it
out
> between the cover and the block.
>
> HTH
>
> Robert Judd.
>
> 1973 TR6 PI
> Southampton
> UK
>
> -----Original Message-----
> From: mcgarry@c2i2.com
>
>
> Hello,
>
> I am new to the group and the TR6 engine. I am trying to install the
> timing cover on my 71 2.5 L engine, so far without success. Can anyone
> shed some tips or tricks on how to depress the adjuster so it clear the
> chain.
>
> Thanks,
> Dale McGarry
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.620 / Virus Database: 399 - Release Date: 11/03/2004
|