On Tue, 9 Mar 2004, at around 23:31:12 local time, Graham Stretch
<technical@iwnet.screaming.net> wrote:
>Hi Mike
>Thanks for the reply, I didn't make it clear, the top is even across the
>front, I stopped with the water before soaking both sides! The seal does not
>seem to be under tension when fitted, I can slide an un laminated business
>card in all the way along without problem!
Dear Graham,
OK, well that is clearly wrong!
> No wonder water was able to get
>in!
Quite.
Have you got all the bolts, washers, spacers and so on lined up
correctly? If so, all I can suggest is that you get the spanners back
out and tighten this up until you can't tighten it any further.
ATB
--
Mike
Ellie - 1963 White Herald 1200 Convertible GA125624 CV
Connie - 1968 Conifer Herald 1200 Saloon GA237511 DL
Carly - 1977 Inca Yellow Spitfire 1500 FH105671
|