Thanks to everyone who replied regarding my hard starting problems. I made
some adjustments to my choke linkage/connection, and was able to coax about
twice the travel out of the jet assembly I had before. The car started up
cold on the first crank.
Now I have another problem... I noticed the bolt that threads into the side
of the front carb that holds the choke fast idle cam was loose. When I
tried to tighten it, it never would tighten up. I went ahead and pulled the
carb off to get a better look at it, and the threaded casing piece that
protrudes from the carb is split. :(
Oh well... I'll deal with that tomorrow (or later...). All the gas fumes
are making me very sleepy... :)
Thanks again everyone!
Kurtis J.
Russellville, Arkansas
1963 TR4
CT19389L
www.geocities.com/tr4_1963
|