Re: Carb Idling Too High

["jeffrey fenwick" <jfenwick@netcom.ca>]

Hi Bill
Last winter, I had my carb off and tried to minimise the slack
in the throttle cable when re-installing. Ended up a little tight and
so the linkage didn't move when I tried to screw out the idle screw.

Hope it's simple like that
Jeff

Bill wrote
>
> After four months on jackstands, my TR3A is back on the road and running
> great.  Only thing is, I cannot set the idle below 1,500 rpm.  <snip>

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive