Message text written by "Bob Rochlin"
>1) In practical terms does it make any difference if the overdrive has a
gear
>reduction 22% or 28% when being installed on a TR6.
In practical terms the 22% will give you 2340 RPM at 60 MPH and the 28%
will give you 2160 RPM.
>2) Can the overdrive transmission be installed without removing the
>emergency brake handle? (It was dicey to get around with the regular
trans.
I don't know how to get the transmission cover off with the hand brake in
place. At any rate the I never found removing and re-installing the
handbrake lever to be a big deal.
Good luck
Dave
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|