I must say that all of the ones that I have came from Spits or GT6. I
currently have only the ones with plugs in both ends, but I am fairly sure
that the one with only one plug is the same, just a blind hole instead of a
through hole.
Even though they look alike other manufacturers may be different and even
other Triumphs may be different.
Sam
At 08:50 PM 6/27/2002 -0400, Sam Gentry wrote:
>I currently have 6 or 7 DPWA's and have rebuilt many of them. If you push
>the shuttle all the way to one side it is easy to see that it does not shut
>anything off. Even with the shuttle all the way (either way) the passage
>from inlet to outlet on either side is unblocked.
>
>I have one in my hand at this time (well, OK... I put it down to type) I
>pushed the shuttle all the way over and the passage is clearly open from
>inlet to outlet.
>
>By the way, be careful centering through the switch hole. There is a small
>spring and a little BB size ball bearing that can easily get lost.
>
>Sam
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|