Bill and All,
Found the Service Info Bulletin No "Sports/16/R", dated May 1958. It states
that no more than .025" can be removed from each side of the TR3 rotor. The
distance from the inner surface of the rotor hub to the inner surface of the
rotor cannot be greater than 1.025" and the distance from the inner surface
of the rotor hub to the outside of the rotor cannot be less than 1.475".
Difference between these values is, amazingly, .450" or .050" less than the
original .5" thickness. Caution is advised to maintain a gradual radius at
the innermost point of the rotor's inside surface. See
ftp://ftp.thelittlemacshop.com/1958bul.pdf
Ed Woods
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|