> 1. Is steel best for fuel lines or is copper a better
> choice?
I like steel.
> 2. Fuel line for the TR3 is 1/4" ID correct?
>From the tank to the original pump is 5/16" od (which probably makes it 1/4"
id), from the pump to the carbs is 1/4" od. The fittings at the carbs are
1/4" od, so if you run 5/16" up there you'll need some sort of adapter.
> 3. If copper is better, can I purchase 1/4" ID line
> from home depot or do I need special tubing?
The 1/4" stuff from Home Depot is 'soft' tubing, it's prone to work harden
and crack over time.
> If steel,
> is bulk brake line/adapters/unions OK to get from
> Autozone?
Yup.
Randall
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|