Larry:
Yes, you can adjust the spring from the inside. I also wrote an
article that is posted on the VTR web site regarding high idle and
the bypass valve you might want to look at.
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
lstein6@earthlink.net wrote:
>
> in more carefully rebuilding my cd150 carbs on my 72 gt6 i got to the part
> about adjusting the bypass valves, which if incorrect can cause high idle (my
> problem). i've noted on two documents how to adjust them for early and late
> carbs. both those documents show a screw you can adjust. my carbs just have
> a cover. no screw ! when i removed the bypass valves from carbs to clean
> them it looked like a screw inside, but nothing on the outside, just a plate.
> does this mean it is factory set and cannot be adjusted ? what if it truly is
> not adjusted properly ? has anyone 'popped off' this plate to find a screw
> head underneath ?
> thanks ! larry lstein6@earthlink.net
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|