3a worn lower control arms

[a Wallace <wallaces@superaje.com>]

Finished removing everything from the frame, and the last parts off were 
the lower control arms. Three out of four had the nylon bushings on the 
inner end worn right through, and the holes are now oval shaped instead of 
round.
Is there any hope of re-using these arms? Putting in new nylon bushes won't 
be enough; is it possible to enlarge the hole till it's round and put in 
thicker-walled bushings, or is there another solution?
TIA,
Jim

///
///  triumphs@autox.team.net mailing list
///