Al,
I just went through this process. Go to a Fastenal or similar fastener
place and order a 3/4 X 16tpi socket screw.
Jeff Johnson
can't wait to get my rebuilt engine fired up!
At 08:05 PM 2/25/01 -0500, Alan wrote:
>
>would somebody know the size & where to get a plug to replace egr valve. I
>started out replacing the intake manifold because the elbow in the water pipe
>rusted out. I ended up breaking the pipe that connects the egr valve to the
>intake manifold. since i have already ordered an alloy valve cover i was
>going to have to take the egr valve off anyway. I went to home depot & all
>local auto parts stores and couldn't find anything with the right thread. Its
>close to 1/2 inch. must be metric.
>thanks
>al salvatore
///
/// triumphs@autox.team.net mailing list
///
|