do you know where one would find such a thing or is this a machine shop job?
I 've seen cars with it pluged but never thought to ask.
thanks
al
----- Original Message -----
From: "Chad & Ariane Jester" <ajester@kscable.com>
To: "Alan" <asalvato@tampabay.rr.com>
Sent: Sunday, February 25, 2001 8:22 PM
Subject: Re: egr valve plug
> Alan,
>
> It is British Straight Pipe thread (BSP). Not metric.
>
> Chad
> ----- Original Message -----
> From: Alan <asalvato@tampabay.rr.com>
> To: <triumphs@autox.team.net>
> Sent: Sunday, February 25, 2001 7:05 PM
> Subject: egr valve plug
>
>
> >
> > would somebody know the size & where to get a plug to replace egr valve.
> I
> > started out replacing the intake manifold because the elbow in the water
> pipe
> > rusted out. I ended up breaking the pipe that connects the egr valve to
> the
> > intake manifold. since i have already ordered an alloy valve cover i
was
> > going to have to take the egr valve off anyway. I went to home depot &
> all
> > local auto parts stores and couldn't find anything with the right
thread.
> Its
> > close to 1/2 inch. must be metric.
> > thanks
> > al salvatore
> >
> > ///
///
/// triumphs@autox.team.net mailing list
///
|