John,
I'm going in for an inspection pretty soon as well. At any garage that
does inspections you will find a checklist of items posted along with the
inspection price (its required by law). They give the car a pretty thorough
going over. Below is the list of what they look for.
MARYLAND STATE POLICE VEHICLE INSPECTION
REQUIRED OFFICIAL PROCEDURE
1. OBTAIN VEHICLE IDENTIFICATION NUMBER AND ODOMETER READING
2. INSPECT STEERING FOR:
(a) steering wheel condition
(b) steering column condition
(c) lash
(d) travel for jamming or binding
(e) linkage for excessive free play
(f) power steering condition
(g) vehicle must be road tested
3. INSPECT WHEEL ALIGNMENT FOR:
a) toe reading
b) caster and camber only if road test indicates
c) rear wheel alignment and axle
4. INSPECT SUSPENSION FOR:
a) ball joint wear
b) king pin or spindle bolt condition
c) wheel bearing condition
d) springs and torsion bar condition
e) shock absorber or strut condition
5. INSPECT BRAKE SYSTEMS FOR:
a) stopping distance, either road test or decelerometer
b) hydraulic system condition
c) drum and disc condition
d) lining and pad condition 2/32 general minimum
e) condition of mechanical linkage
f) vacuum or hydraulic booster system condition
g) parking brake function
6. INSPECT TIRES & WHEELS FOR:
a) condition of tires, size, type, and tread depth
b) condition of wheels, nuts, studs, or lugs
7. INSPECT FUEL SYSTEM FOR:
a) fuel tank condition and system leaks
b) choke, hand throttle and accelerator operation
8. INSPECT EXHAUST SYSTEM FOR:
a) condition of manifold, all piping, muffler, resonator and the
tailpiping; including leaks
and proper mounting
9. INSPECT BUMPERS FOR:
a) condition of bumpers including height and proper mounting
10. INSPECT FENDERS FOR:
a) condition of fenders to include mounting and coverage of wheels and
tires
11. INSPECT LIGHTING FOR:
a) condition and function of all original equipment lighting and
whatever added lights
are authorized
b) inspect head lights for condition, candle power output and aim
c) inspect auxiliary or fog lamps for aim and proper mounting
12. INSPECT MIRRORS FOR:
a) condition of mirrors to include unobstructed view of both inside
and outside mirrors
when required
13. INSPECT VEHICLE GLAZING FOR:
a) proper materials used for specific locations
b) operation of driver window
c) damage that exceeds allowable limits
14. INSPECT WINDSHIELD WIPERS FOR:
a) satisfactory operation and condition of arms and blades
15. INSPECT HOOD/CATCHES FOR:
a) condition and proper operation of hood for full closure
16. INSPECT DOORS, HANDLES AND LATCHES FOR:
a) condition and proper function of all doors, latches, hinges and
handles
17. INSPECT FLOOR AND TRUNK FOR:
a) holes or rusted out and weakened conditions in floor or trunk pans
18. INSPECT SPEEDOMETER AND ODOMETER FOR:
a) operation and legibility
b) register in mph or kilometers
19. INSPECT ELECTRICAL SYSTEM FOR:
a) proper condition and function of horn
b) condition of wiring and switches
20. INSPECT DRIVERS SEAT FOR:
a) presence, condition and mounting
21. INSPECT SAFETY BELTS FOR:
a) presence, condition and operation and mounting
22. INSPECT MOTOR MOUNTS:
a) if originally manufactured with; check presence and condition
23. INSPECT GEAR SELECTION INDICATOR FOR:
a) proper indication of correct position
24. INSPECT UNIVERSAL JOINTS / CONSTANT VELOCITY JOINTS FOR:
a) attachment and worn, damaged, or loose joints
b) torn or damaged CV joint boots
25. INSPECT EMISSIONS EQUIPMENT FOR PRESENCE AND PROPER
CONNECTION:
a) catalytic converter
b) fuel filler inlet restrictor
c) positive crankcase ventilation
d) air injection system
e) exhaust gas recirculation system
f) evaporative emissions system
26. PERFORM AIMING OF HEADLIGHTS
Good luck,
Sean
|