I used a propane torch and a scraper. Works fine and much cheaper.
Patrick
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of LaJoMor@aol.com
Sent: Saturday, August 12, 2000 5:00 PM
To: jmcneal@ohms.com; reagntsj@ricochet.net; triumphs@autox.team.net
Subject: Re: Undercoating removal
Jeff, et al....
Read the finer print folks....Eastwood's kit contains..."3 cans of Undergone
Remover, 2 cans of Undergone Cleaner, and 1 each of the 1-1/2" and 3"
scrapers".
Larry M.
|