Jack :
To add a load, you need to connect something that draws 10 amps at 6
volts between the '10 amp' terminal and ground.
If all you want to do is test your box, then a regular 12v headlight
would do for a test load. It won't draw 10 amps, but should draw enough
to drop the voltage some, like maybe to 9 or 10 volts.
Randall
Jack Levy wrote:
>
> It's a box called Volt-A-Drop, been around for a long time. About 3X4 inches
> 1/2 in deep made of a ceramic like material. Has a screw labeled 12 volt
> that connects to the batt + one labeled 10 amps and one labeled 20 amps,
> these are for the accessories and would feed the positive side on a neg
> ground system. I tested them by just touching the 10 amp with the red lead
> on a meter and black on ground. Not sure how to add a 10 amp load to this.
|