Message text written by INTERNET:Crazeecooter@aol.com
>The frame off is complete...pretty much...and took the TR6 for a couple of
test drives. I am a little concerned because the overdrive tends to
disengage every now and then periodically. If I wait a few secons and
re-engage it it usually works for awhile.
<
Jonathan,
Check your inhibit switch again. If it is not adjusted properly it may be
making intermittant contact . You can remove the switch and remove a shim
and reinstall. Then you can try again.
I had the same problem with mine and I took out some shimms and all is
well.
Good luck
Dave
|