triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

clutch stay rod, was TR 3

from [Jim Bauder] [Permanent Link][Original]
To: fogbro1@bellatlantic.net
Subject: clutch stay rod, was TR 3
From: Jim Bauder <jimbpps@pacbell.net>
Date: Thu, 27 Jan 2000 17:49:29 -0800
Cc: TR List <triumphs@autox.team.net>
References: <1D6EE5D5D5A0D3118D4D00508B55EA1A19A023@NTNREXH1><3890714E.EBFA011A@pacbell.net> <389073CB.FC1EC78F@bellatlantic.net> 
Ed,

The clutch stay rod runs between the clutch slave cylinder upper hole to
one of the oil pan bolts. steadys the slave cylinder to prevent the bell
housing from cracking.

Ask me how I know!

Jim Bauder
'58TR3
Palo Alto, CA
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • clutch stay rod, was TR 3, Jim Bauder <=
Previous by Date:  Re: TR250 Grille Blackout, Joe Sholtes IV
Next by Date:  Re: Losing wire wheel, Mark Sinclair
Previous by Thread:  Re: a warning (Thanks Phil...), Joe Sholtes IV
Next by Thread:  RE: a warning (Thanks Phil...) LBC added, Jim Altman
Indexes:  [Date] [Thread] [Top] [All Lists]