David:
I ran mine from the securing bolt on the release arm directly
to the side shelf on the passenger side, drilled a small hole and
put in a grommet. This way the wire is in the inside (tranni side)
of the passenger foot well. I have a large washer attached for
easy grabbing and pulling. There will undoubtedly be about
20 other versions suggested!
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
Davgil@aol.com wrote:
> Friends,
> I am in the process of installing an emergency bonnet release cable in my 76
> TR6. My plan was to route the cable up to the grill, but at a recent club
> meeting another club member said that he simply installed a second cable
> alongside his primary cable. This seems like such an elegant solution, I
> thought I would give it a try. I am curious if anyone else has used this
> approach. No particular hurry on this, but I would be interest in any
> comments. As always, thanks for your assistance. (By the way, I thought the
> Mayflower article was in the 1492 edition)
> David Gill
|