John:
I always used Non-hardning Peratex. Thak the tube and put a bead around the
base of the block below the gasket. then use your finger to smooth it down.
Then put your gasket in the block. Next do the same thing to the sleave. In
20+ years never had any leaks.
Good Luck
Bob Kamholtz
ECOD
-----Original Message-----
From: john matthews <john__matthews@hotmail.com>
To: triumphs@autox.team.net <triumphs@autox.team.net>
Date: Tuesday, August 03, 1999 00:06
Subject: gasket sealer (figure 8)
>
>Hi,
>
>Does anyone have recomendations on gasket sealer for the figure 8 gaskets
in
>a TR-4 Engine?
>
>Cheers,
>
>John Matthews
>'61 Herald
>'64 TR-4
>
>
>
>
|