--part1_36144156.24c4f1cd_boundary
In a message dated 7/19/99 14:13:54, CarlSereda writes:
<<<<> I have a 1969 TR6 project that I have owned for 9 years, that I have
just
> replaced the clutch in. While I was at it I rebuilt the Master Cylinder and
> the Slave Cylinder. Now, the problem is that when I bring my foot up off the
> floor it grabs right there.>>
ona TR4s you have to adjust the rod coming out of the clutch slave cylinder
for .010 play by adjusting the rod nut - I wonder if yours is similar set-up
and simply needsthat simple adjustment.
Carl
'64 TR4 since '74>>
--part1_36144156.24c4f1cd_boundary
Content-Disposition: inline
Return-path: CarlSereda@aol.com
From: CarlSereda@aol.com
Full-name: CarlSereda
Date: Mon, 19 Jul 1999 17:13:54 EDT
Subject: tr6 clutch low grab
To: triumphs@autox.team.net
<<> I have a 1969 TR6 project that I have owned for 9 years, that I have just
> replaced the clutch in. While I was at it I rebuilt the Master Cylinder and
> the Slave Cylinder. Now, the problem is that when I bring my foot up off the
> floor it grabs right there.>>
ona TR4s you have to adjust the rod coming out of the clutch slave cylinder
for .010 play by adjusting the rod nut - I wonder if yours is similar set-up
and simply needsthat simple adjustment.
Carl
'64 TR4 since '74
--part1_36144156.24c4f1cd_boundary--
|