Re: cutting masnoite

triumphs

Re: cutting masnoite

from [Gbouff]

To:	Triumphs@Autox.Team.Net
Subject:	Re: cutting masnoite
From:	Gbouff@aol.com
Date:	Thu, 30 Jul 1998 18:32:03 EDT

You can get a nice cut by using a router with a straight bit and bushing
guide.  You can then use your original panels as a template to make an exact
copy.  If you don"t have the original panels you'll have to make a template
from plywood or similiar material.

Gary Bouffard
TS 58399

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
cutting masnoite, Gano, Ken RE: cutting masnoite, Collins, Jack L. MAJ Re: cutting masnoite, Malcolm Walker Re: cutting masnoite, jmwagner Re: cutting masnoite, KTRIUMPH Re: cutting masnoite, Jane Burdekin Re: cutting masnoite, Lawrence R Zink Re: cutting masnoite, Gbouff <= RE: cutting masnoite, Peter Zaborski

Previous by Date:	Re: website, vitesse
Next by Date:	Re: Hemmings, scott s.
Previous by Thread:	Re: cutting masnoite, Lawrence R Zink
Next by Thread:	RE: cutting masnoite, Peter Zaborski
Indexes:	[Date] [Thread] [Top] [All Lists]