Hey Paul,
Yes I just did this last week! on the end of the stud with no nuts place two
nuts together. Tighten them against eachother, then hold a wrench on the
bottom one and unscrew the rusted nut on the other side. If this isn't clear
please ask any questions you have.
Later,
JHD IV
>
>
> I'm in the middle of replacing the waterpump but the studs that hold
> the bolts to the housing came out with the nuts. The previous owner
> must have "lock tite" the nuts to the studs. Any suggestions on
> removing them or should I just find new studs.
>
> paul_barlow@bctransit.com
>
> Paul Barlow
> TR250 CD 5470
>
>
|