On Tue, 14 Apr 1998, Joe Curry wrote:
> Remove the cable from the back of the guage and apply the lubricant into
> the housing. Twist on the cable to work the lubricant into the lower
> parts of the cable housing. With the lower end attached, the cable
> won't spin freely and the lubricant is very thin and will flow down the
> cable.
The only graphite lube I could get locally was in a spray bomb, and the
liquid carrier for this stuff tends to flash away very quickly. Is there
an alternate method, or should i try to find "wet" graphite? (the bottle
says "dry"...)
Or do I try to find powdered graphite, with no carrier?
-Malcolm
PS another downside- spray graphite gets *everywhere* and it is messy
|